Two way slide switch
PCB Mountable Slide Switch. Single Pole, Double Throw = SPDT
This switch can be on in both positions, switching on a separate device in each case. It is often called a changeover switch. For example, a SPDT switch can be used to switch on a red lamp in one position and a green lamp in the other position. A SPDT slide switch may be used as a simple on-off switch by connecting to COM and one of the A or B terminals shown in the diagram. A and B are interchangeable so switches are usually not labeled.
CONTACT: 1P2T- SILVER PLATED
RATING: 0.3A X 30 V DC
CONTACT RESISTANCE: 30 milli Ohms max.
INSULATION RESISTANCE: 100 M Ohms min. 500 V DC
PROOF VOLTAGE: 500 V AC for 1 min.
OPERATING FORCE: 150 + 100 gf
OPERATING LIFE: 50,000 cycles
PCB Mounting Guidance