SUNROM ELECTRONICS

MG84FG516 Megawin MG84FG516AD64 LQFP64 USB IC

1-T 80C51 core, 64KB Flash with USB Support

Product Code 6628

No Stock.
Currently this item is not available for ordering.
Quantity Pricing
Quantity :
Price (Discount%)
1-49 :
Rs.145.00/- (0%)
50-99 :
Rs.137.75/- (5%)
100-499 :
Rs.130.50/- (10%)
500-999 :
Rs.127.60/- (12%)
1000+ :
Rs.123.25/- (15%)
MG84FG516 Megawin MG84FG516AD64 LQFP64 USB IC
Sunrom Product Code for Ordering:
6628

1-T 80C51 Central Processing Unit
* MG84FG516 with 64K Bytes flash ROM

    *ISP memory zone could be optioned as 1KB/1.5KB~4KB
    *Flexible IAP size.
    *Code protection for flash memory access
    *Flash erase/program cycle: 10,000 times
    *Flash data retention: 100 years at 25℃

* Data RAM

    *On-chip 256 bytes scratch-pad RAM
    *4096 bytes expanded RAM (XRAM)
    *Up to 5120 bytes expanded RAM (XRAM) by sharing USB buffer

* Dual data pointer
* Variable length MOVX for slow SRAM/Peripherals
* Interrupt controller

    *17 sources, four-level-priority interrupt capability
    *Four external interrupt inputs, nINT0, nINT1, nINT2 and nINT3
    *All external interrupts support High/Low level or Rising/Falling edge trigger

* Four 16-bit timer/counters, Timer 0, Timer 1, Timer 2 and Timer 3

    *T0CKO on P34, T1CKO on P35, T2CKO on P10 and T3CKO on P01
    *X12 mode enabled for T0/T1/T2/T3

* Programmable 16-bit counter/timer Array (PCA) with 6 compare/capture modules

    *Capture mode
    *16-bit software timer mode
    *High speed output mode
    *8/10/12/16-bit PWM (Pulse Width Modulator) mode with phase shift function

* Keypad Interrupt (P0/P2/P5/P6)
* 12-Bit ADC

    *Programmable throughput up to 250 ksps
    *Up to 8 channel single-ended inputs or 4 channel differential inputs

* Enhanced UART (S0)

    *Framing Error Detection
    *Automatic Address Recognition
    *Speed improvement mechanism (X2/X4 mode)

* Secondary UART (S1)

    *Dedicated Baud Rate Generator
    *S1 shares baud rate generator to S0.

* Master/Slave SPI serial interface
* Master/Slave tow wire serial interface (TWSI)
* USB Device Controller

    *USB Full speed (12Mbps) operation and USB specification 2.0 compliant
    *Intel 8X931 like USB control flow
    *Built-in USB transceiver and 3.3V regulator
    *Six pairs flexible endpoints for control/interrupt/isochronous/bulk IN/OUT transaction
    *1K bytes FIFO for USB endpoint buffer
    *Software-controlled USB connection/disconnection mechanism

* Programmable Watchdog Timer

    *One time enabled by CPU or power-on
    *Sourced from on-chip low frequency oscillator
    *Interrupt CPU or Reset CPU on WDT overflow
    *Watch mode support

* On-Chip-Debug interface (OCD)
* Maximum 55 GPIOs in LQFP64 package

    *P3 can be configured to quasi-bidirectional, push-pull output, open-drain output and input only
    *P0, P1, P2, P4, P5 and P6 can be configured to open-drain output or push-pull output
    *P6.0 and P6.1 shared with XTAL2 and XTAL1

* Multiple power control modes: idle mode, power-down mode, slow mode, sub-clock mode, watch mode and monitor mode.

    *All interrupts can wake up IDLE mode
    *12 sources to wake up Power-Down mode
    *Slow mode and sub-clock mode support low speed MCU operation
    *Watch mode supports WDT to resume CPU in power down
    *Monitor mode supports BOD1 to resume CPU in power down

* Two Brown-Out Detectors

    *BOD0: detect 2.2V
    *BOD1: selected detection level on 4.2V/3.7V/2.4V/2.0V
    *Interrupt CPU or reset CPU
    *Wake up CPU in Power-Down mode

* Operating voltage range: 2.0V – 5.5V

    *Minimum 2.2V requirement in flash write operation (ISP/IAP/ICP)

* Operating frequency range: 36MHz(max)

    *External crystal mode, 2 – 12MHz @ 2.0V – 5.5V and 2 – 25MHz @ 2.7V – 5.5V.
    *CPU up to 12MHz @ 2.0V – 5.5V, up to 25MHz @ 2.4V – 5.5V and up to 36MHz @ 2.7V – 5.5V

* Clock Sources

    *Internal 12MHz oscillator (IHRCO): factory calibrated to 1%, typical
    *External crystal mode
    *Internal Low frequency RC Oscillator (ILRCO) support: about 32KHz
    *External clock input (ECKI) on XTAL2/P6.0, up to 36MHz.
    *Internal Oscillator output on XTAL2/P6.0
    *On-chip Clock Multiplier (CKM) to provide high speed clock source

* Operating Temperature:

    *Industrial (-40℃ to +125℃)*

Sunrom Electronics & Sunrom Technologies are two companies, that are the foremost online e-commerce stores since 2004, providing innovative embedded systems, components & services. Our aim is to empower you to Make In India. We work closely with electronics manufacturing companies & individuals to understand & solve the challenges faced during production. We do not just sell things, We use them ourselves in our products, and provide you with high quality tested components for trouble free experience.

Pride of India   Google Reviews